Full Guide to Use AnyGo Native Mode for iOS

iToolab AnyGo has recently launched its exclusive Native Mode for iOS devices. Native Mode is a new way to change iPhone location. Instead of relying on cracked apps, it directly changes location on original apps. Location-based apps such as Pokémon GO, social platforms, and food & delivery services will receive the updated GPS data and function exactly as if you were physically present at the chosen spot.

Core Advantages of AnyGo Native Mode

• No modified apps: All location spoofing runs on original apps, with no account ban risk as LBS platforms cannot detect your fake location.
• Works with all LBS apps: No need for cracked APKs or special versions. It perfectly supports Pokémon GO, Monster Hunter Now, Pikmin Bloom, Snapchat, Instagram, life 360, Tinder, Bumble, Uber, and all other location-based apps.
• Flexible accuracy adjustment: You can adjust the precision of your location. A larger radius makes the spoofing look more natural, helping you avoid anti-cheat systems.

How to Spoof iPhone Location with AnyGo iOS App

Step 1. Download and launch the AnyGo iOS app and select Native Mode from the bottom of the screen.

Step 2. Enter your target city or coordinates in the search bar, or tap any desired spot on the map. Tap Teleport.

Step 3. Set up the required VPN connection and trust the certificate. (this is a one-time setup for first use only).

The app will prompt you to configure a VPN profile. Please allow the system pop-up and complete these 3 steps to install & trust the security certificate:

i. Download the certificate file (.crt) from the link provided in the app.

ii. Install the profile: Go to Settings → General → VPN & Device Management, find the profile and tap Install.

iii. Enable full trust: Go to Settings → General → About → Certificate Trust Settings, and turn on the switch for the new certificate.

Step 4. The final step to activate the location change.

For iOS 17‑26: Turn Location Services off and then back on (in Settings > Privacy & Security > Location Services).

For iOS 27 and above: Simply restart your iPhone once.

Your iPhone GPS will update to the target location immediately. The spoofed location remains active even after you fully close the AnyGo app.

How to Spoof iPhone Location with AnyGo for Windows/Mac

Step 1. Download and launch AnyGo on your Windows PC, then select Native Mode from the main interface.

Step 2. Complete certificate and proxy setup on your iPhone. This mandatory setup is required to enable location spoofing successfully.

Please follow the full steps below carefully:

2.1 Confirm consistent network connection

Make sure your Windows PC and iPhone are connected to the same Wi‑Fi network.

If you are unsure about the network status, scan the QR code displayed on AnyGo with your iPhone. If QR scanning fails, manually enter the provided URL in your iPhone’s browser instead.

Once the network check finishes, click Connection verified, next.

2.2 Install and trust the security certificate

1. Scan the on-screen QR code using your iPhone to open the certificate download page.
2. Tap Download CA certificate.
3. Tap Allow when your iPhone pops up a permission request.

4. Navigate to Settings > General > VPN & Device Management, locate the profile named Network Location Service and tap Install.
5. Head to Settings > General > About, scroll all the way to the bottom, find Network Location Service, and turn on the trust toggle.

After finishing the certificate trust setup, click Trusted, next.

2.3 Set up the HTTP Proxy on iPhone

1. Open iPhone Settings > Wi‑Fi, double-check that your phone is connected to the identical Wi‑Fi as your computer.
2. Tap the blue ⓘ icon next to your active Wi‑Fi network.
3. Scroll down to the HTTP Proxy section and tap Configure Proxy.

4. Choose the Manual proxy mode.
5. Fill in the proxy address and port shown on your PC screen, then tap Save at the top-right corner.

Click Done button to wrap up all mobile-side configurations.

Once you finish all certificate and proxy configurations on your iPhone, you can freely modify your iPhone’s GPS location directly via AnyGo on your Windows computer.

Step 3. Enter your desired destination or GPS coordinates into the search bar and click Search. You may also tap any spot directly on the map to pick your target location. Once ready, hit the Teleport button.

Step 4. Your target location will be applied successfully. One final quick step is needed for the fake GPS to take full effect:

Head to iPhone Settings > Privacy & Security > Location Services, toggle Location Services off, then switch it back on. Your iPhone GPS will now fully update to your selected location.