While iPhone is considered a stable phone still it is not without issues. Many issues are on this phone that you could face. Recently some users have reported that their iPhone died and won’t turn back on issue. However, you can fix this error by following some methods or ways.
In this article, we are introducing you to how to fix iPhone died and won’t turn on while charging issue. So if you are facing it right now, then go through this article without hesitating.
Part 1: Why My iPhone Died and Won’t Turn Back On?
Despite your iPhone being plugged into a charger, the following are some of the reasons why it is refusing to turn on.
Reason 1: iPhone Operating System Issue
An issue with your phone’s operating system can prevent the phone from turning on. It needs to function properly or your phone will not turn on since it is your operating system that loads all the content on your iPhone.
Reason 2: iPhone’s Physical Parts Issue
An issue with one of the internal physical parts of your iPhone can cause iPhone died and won’t turn back on error. There could be any physical damage to your iPhone if you dropped your phone and that might be why your iPhone is refusing to turn back on.
Reason 3: Charging Cable Issue
The cable might not be providing any electric supply even though you have plugged your iPhone into charging. When you get a non-authentic charger or cable from the market, this usually happens. The charger is not charging the phone for which reason your iPhone is not turning back on.
Reason 4: Broken Power Button
If the power button is broken for whatever reason, you may face difficulties turning on your device since the button is used to turn on the iPhone. To turn on your iPhone, a broken power button does not send the needed signals to your phone’s system.
Part 2: Fix iPhone Died and Won’t Turn On Caused by Software Problems
For iPhone died and won’t turn on while charging, this section of this article addresses the four possible software solutions.
1. Charge iPhone
You need to charge it for a while more if your battery has not charged enough to power your iPhone. It might seem like you have been charging it but still, it is not coming up. Before giving up, you may need to keep trying it a little longer. If your iPhone is dead, it ought to be charged for at least 30 minutes then you can try to reboot it. And your iPhone will be fully charged in three hours.
2. Check Lightning Cable/Charger/Charging Port
On your lightning cable, there are three things to check for. First, check the cable itself, the charger, and the charger port you are using. Through multiple trials, you can check out these compartments. To ensure your USB cable is not broken in any part, start by looking at it closely from one end to the other. You might have to start considering getting a new cable if you notice that it is wearing or tattered in any part. But before doing so, you can check other compartments.
The charger is the next trial. You have to plug your iPhone into other media. A couple of options are available such as different USB ports for your computer, a different wall adapter, a car charging port, a speaker dock, and other available media. The fault is not your cable if it works in at least one medium. Instead of using a USB hub, it is often better to plug your iPhone directly into a USB port on your computer. All the devices on a hub seem to be sharing the same supply of power is the reason.
Using a friend’s lightning cable or charge is the last trial. Or if you do not have access to your friend’s lightning cable and charger, you could buy a new one. You have to change your cable or charger if a different lightning cable or charger powers your iPhone. The lightning cable is a low-quality charger made by a third party is another reason it is not functioning well. It is still best to go for a high-quality, probably low-cost charger since iPhone chargers can be expensive.
3. Force Restart iPhone
By forcing your iPhone to restart, iPhone died and won’t turn on while charging can be fixed. A lot of software-related glitches can be solved by restarting iPhones.
iPhone X/XR/8/11/12/13 died and won’t turn on while charging:
- To press the “Volume Up” button, use a finger and sharply remove your finger from it.
- After that hold the “Volume Down” button and quickly release it.
- Press the “Side” button using your finger. Do not remove your finger until the Apple logo shows.
- Now on the “Side” button, place your finger and keep pressing it till the Apple logo shows. Your iPhone will come on then.
iPhone 7/7 Plus died and won’t turn on while charging:
Until the Apple logo appears, press and hold the “Volume Down” button and the “Side” button.
iPhone 6 died and won’t turn on while charging:
Until you see the Apple logo, press and hold the “Home” button and the “Power” button.
4. Fix iPhone with iToolab FixGo
Normally, software errors like iOS glitches cause the situation where iPhone dies and won’t turn on while charging. It is advisable to use a professional iOS repair tool in this case. You can try an iOS system recovery tool – iToolab FixGo to fix your iPhone died and won’t turn back on issue. This powerful software supports more than 200+ iOS issues and saves your Apple device with no data loss. Including iPhone model 13 and iOS 16 beta, it supports all iOS versions and devices. With a friendly interface, this tool not only fixes iOS device issues but also allows you to downgrade the iOS 16 beta to any supported version.
Steps to fix iPhone died and won’t turn on while charging:
Step 1 Ensure that you have installed iToolab FixGo on your computer and choose “Standard Mode” to fix the error with no data loss. Then use the device lightning cable to connect your iPhone to the computer and click “Fix Now” to start the process.
Step 2 Click “Download” after selecting the path for the firmware because the program needs the latest firmware package to repair the device. You can simply click “Select” and manually import the firmware if you had already downloaded the firmware package.
Step 3 Then click “Repair Now” after the firmware has been downloaded to your computer. The tool will immediately start repairing your device.
Part 3: Fix iPhone Died and Won’t Turn on Caused by Hardware Problems
If your iPhone died and won’t turn on while charging, this section will help you find the four possible hardware solutions.
1. Replace the Lightning Connector
You should inspect and probably fix your logic board to begin hardware solution for fixing iPhone died and won’t turn on while charging. The physical damage to your iPhone can make the lightning connectors on your motherboard disconnected. You need to change a faulty chip or apply a soldering technique to reconnect a severed link in such a case. And you may need to change the logic board entirely if your iPhone was exposed to liquid.
2. Replace the Battery
Replacing your battery is another possible hardware solution for iPhone died and won’t turn on while charging. You need to ascertain that your battery is responsible for the issue before getting a new battery. You can use a partially charged battery to check if your battery is the possible cause. Also, try charging it to ensure your charging point is not broken while the half-charged battery you are experimenting with is still connected. You should get a new battery if your iPhone is working well.
3. Replace the Power Button
If your power button is broken, your iPhone may be fine after turning it off but your effort has been to no avail. You will need a replacement for the power button if you suspect that it is faulty. Try charging your iPhone to check if the power button is defective. You can narrow your guess down to a faulty power button if it is charging.
4. Contact Apple Support Center
As a repair shop and even more, Apple experts are also expected to offer the same service. And you can get a swap on a cheaper repair done if you are sure your warranty is still valid. All you have to do is to reach out to them and explain your problem. Via their get support service, you can contact Apple experts.
Summary
In this article, we have introduced you to how to fix iPhone died and won’t turn on while charging issue. You can use the above methods if you are having issues getting your iPhone to turn on while it is charging. These methods will resolve the issue most likely. But if these methods don’t work, we would highly recommend you to use iToolab FixGo to fix iPhone died and won’t turn back on the issue. It is one of the best tools to repair any issue with iOS devices without losing a single data. You can also enter or exit recovery mode by using this tool. It lets you downgrade your iOS device to the previous version easily.
