To find Pokémon in Pokémon GO, users are urged to explore new areas. But not everyone has the time or means to drive far for a game. You can fake your location to match the location with uncommon Pokémon in order to catch those that might not be available in your area. This is where iTools Pokémon GO spoofing becomes useful. A premium tool that enables location spoofing is iTools.
With it, you can finish location-based tasks and visit places you have never actually been. Want to know how to fake your location in Pokémon GO in 2026? This guide shows how to use iTools to spoof Pokémon GO on iPhone and Android, from the iTools dongle Pokémon GO setup to the desktop build, with the setup steps for each one.
Part 1. Is iTools Pokémon GO Spoofing Still Working on iOS 27?
Many players still ask whether iTools Pokémon GO spoofing works on iOS 27. Apple’s newer security layers make GPS injection harder than it was on iOS 18, so results depend on your device and firmware. iTools mobile Pokémon GO keeps its location-changing features, but some users report spawn errors or the game flagging movement that looks impossible.
iTools itself remains a solid iOS device manager, and as an iTools spoofer it is still worth testing, but try its Virtual Location module on a secondary account before you point it at a main one.
Part 2. How to Use iTools to Spoof Pokémon GO
iTools spoofing lets you change your location, jump straight to specific coordinates, and control movement far more precisely, all of which make Pokémon GO easier to play from home. Each route below is a different type of tool, though, and the iTools Pokemon GO spoofing setup you pick decides how much of your account is exposed to detection. The sections below show how to use iTools to spoof Pokémon GO with each option it ships, one setup at a time.
1. iToolsBT 2.0
The iToolsBT 2.0 is the iTools dongle Pokémon GO players still buy: a small device that plugs into the charging port of your iPhone and talks to it over Bluetooth. It gives you a 360-degree joystick for walking in any direction, plus four extra buttons you can map to in-game actions. Because the movement is injected through hardware rather than software alone, it is safer and more reliable than the old app-only approach to spoofing.
Steps to Use iToolsBT 2.0:
Step 1: Purchase and charge the iToolsBT 2.0 dongle.
Step 2: Connect the dongle to your iPhone using Bluetooth.
Step 3: Turn off your iPhone’s location services.
Step 4: Open Pokémon GO then use the joystick on the dongle to move your avatar around in the game.
2. Victory Road & Pokehub Coordinates
Victory Road and Pokehub are third-party coordinate databases rather than iTools features, but they are where most players get the iTools Pokémon GO coordinates they paste in. Both are updated often, so the nests and hotspots you use are usually still live. Pick a dense spawn area you can reach inside one cooldown window instead of jumping blind.
Steps to Use Victory Road & Pokehub Coordinates:
Step 1: Open the iTools Virtual Location feature on your device.
Step 2: Enter the Victory Road or Pokehub coordinates.
Step 3: Click on “Move” to teleport your avatar to the selected location in Pokémon GO.
3. iToolsGo
For spoofing specifically, iTools offers iToolsGo, a dedicated iTools mobile Pokémon GO app with teleportation, GPX route playback, and real-time movement control. You can jump straight to a raid, auto-catch Pokémon, and skip the catch animations that slow a route down.
Steps to Use iToolsGo:
Step 1: Download and install the iToolsGo app on your iPhone.
Step 2: Open the app and enable location spoofing.
Step 3: Use the joystick to move, or enter coordinates to teleport.
Step 4: Enjoy auto-catching Pokémon and participating in raids.
4. Modded Go Plus with Battery [USB-C Connector]
The Modded Go Plus is third-party hardware rather than an iTools product, but it is the add-on many iTools Pokémon GO players pair with a spoofer. It throws Poké Balls and spins PokéStops automatically, so your route keeps catching while your hands are off the phone. This version swaps the disposable cell for a 200mAh rechargeable battery and uses a USB-C connector, which means a cable you already own.
Steps to Use Modded Go Plus:
Step 1: Charge the Modded Go Plus using a USB-C connector.
Step 2: Pair it with your iPhone.
Step 3: Open Pokémon GO, and the device will catch Pokémon and spin PokéStops for you.
5. iTools Desktop
The iTools Desktop edition is the full desktop build of the same suite. It can launch Pokémon GO on several connected devices at once, simulate a GPX route, and set a virtual location for each phone. If you want one computer to run your route across multiple devices, this is the version to install.
Steps to Use iTools Desktop:
Step 1: Download and install iTools Desktop, then connect your iPhone to the computer with a USB cable.
Step 2: Open the Virtual Location tool in iTools Desktop.
Step 3: Enter the coordinates or use the joystick to move within Pokémon GO.
Part 3. The Best Fake GPS for Pokémon GO – Supports iOS 27
If iTools Pokemon GO spoofing still leaves you fighting error 12 on iOS 27, the route below is what most players switch to. iToolab AnyGo is a GPS location changer built for iOS 27, with a feature set aimed squarely at Pokémon GO. It fixes Pokémon GO error 12, draws custom routes, and simulates movement at whatever speed you pick.
You can teleport anywhere, collect rewards, hatch eggs, and reach new trainers without leaving home. AnyGo’s cooldown timer counts down the wait after each jump, which is the single biggest factor in keeping an account out of trouble. It also works with other location apps such as Snapchat, Monster Hunter Now, and Find My.
- Instantly spoof your location to any place in the world with just one click.
- Create custom routes and simulate GPS movement at different speeds, such as walking, cycling, or driving.
- Newly released Native Mode: spoof iOS location without modded apps for all LBS apps safely.
- Auto catch Pokémon and spin PokéStops using GO Catcher.
- Support Monster Hunter Now, Pikmin Bloom and other location-based apps.
- No Failed to Detect Location Error 12.
- Run seamlessly on Windows, Mac, iOS, and Android devices.
- Fully support the latest iOS 27/Android 17.
How to Spoof Pokémon GO with AnyGo on iOS
Step 1. Download and launch the AnyGo iOS app, then select Native Mode or General Mode from the bottom of the screen.
Step 2. Enter your target city or coordinates in the search bar, or tap any desired spot on the map. Tap Teleport.
Step 3. Set up the required VPN connection and trust the certificate. (This is a one-time setup for first use only.)
Step 4. Your iPhone GPS will update to the target location immediately. The spoofed location remains active even after you fully close the AnyGo app.
Part 4. Why VPNs Don’t Work for Pokémon GO Spoofing
Plenty of players assume a VPN is enough to change their Pokémon GO location. It is not: a VPN only changes your IP address, and the game reads GPS, not IP. Pokémon GO checks coordinates in real time, so an IP that says Tokyo with a GPS fix that says Ohio is a contradiction it can see. A VPN also gives you no way to move at a believable speed, which is exactly what the cooldown system watches for.
That mismatch is easy for Niantic to flag, and a flagged account can pick up a soft ban or a strike. A VPN on its own will never spoof Pokémon GO for you.
Conclusion
iTools Pokémon GO spoofing does give you real tools for changing your location, but none of them is foolproof, and Pokémon GO keeps tightening its detection. That is why we point players to AnyGo Location Spoofer as the more dependable alternative. AnyGo moves your GPS to any spot on the map in one click, keeps the cooldown countdown in view, and fully supports the latest iOS 27 and Android 17.